Go BottomIngersol Garden Tractors
 | John
Join Date: Posts: 1 
|
1999-08-10 6798
I have recently accuired a 646 Case.It runs but not well. I need to rebuild or replace the Onan CCKA engine.Does anyone know what would be a good replacement engine? Sometimes it is cheaper than rebuilding. After I get it running I would like to find a used hydrolic tiller. I believe it will be worth the expense as they are built like a tank. ....
Reply to |
Quote Reply |
Add PhotoIngersol Garden Tractors
| Tom
Join Date: Posts: 1
|
1999-08-10 6799
My JD 750 currently only has hydraulics to lift the rear 3pt hitch. Does JD or some other company sell a kit to add hydraulic lines, valves, etc. to power small implements (broom, etc.)? What is the capacity of the pump on the 750?
Reply to |
Quote Reply |
Add PhotoIngersol Garden Tractors
| ghv
Join Date: Posts: 1
|
1999-08-11 6831
Tom,Yes, JD does sell a kit to add hydraulics to the 750. The kit is complete and comes with clear, concise directions for installing it. So if you have some tools, and general mechanical working knowledge, you should be able to install it yourself without much difficulty. The kit that I installed had two selective control valves (and naturally, four outlets) that I use with my front-mount snowblower. I'm not sure of the pump capacity. Hope this helps -- Good Luck! ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This